Capacitors are manufactured with certain standard capacitances and working voltages. However, these standard values may not be the ones that are actually needed in a particular application. Two or more capacitors can be grouped in series or in parallel to achieve desired capacitance and voltage. When connected in series, the total capacitance decreases while the voltage rating increases, whereas in parallel connections, the total capacitance increases and maintains the same voltage rating. A capacitor stores energy in the electric field between its plates and stored energy is proportional to the square of the voltage and capacitance U = CV2, where symbols have their usual meanings. Two capacitors, one of 3 F and the other of 6 F, are connected in series in the circuit as shown in the figure, for a long time.

(i) The total capacitance of the circuit is : 1

(A) 6 F (B) 3 F (C) 9 F (D) 2 F

(ii) The current in the 10 resistor is : 1

(A) 0.3 A (B) 0.6 A (C) 0.2 A (D) 0

(iii) The potential difference between point A and B is : 1

(A) 2V (B) 0.3 V (C) 0.2 V (D) 3 V

(iv) () 6 F

(A) 6 C (B) 4 C (C) 12 C (D) 8 C

(a) The value of charge on the plates of the 6 F capacitor is : 1

(A) 6 C (B) 4 C (C) 12 C (D) 8 C

(b) The wire between two capacitors is cut at point P. The current in the circuit will : 1

(A) increase (B) decrease (C) remain the same (D) first increase then become stable